GF 287 RoughMark Clear™

Matte Clear Polymeric Vinyl - High-Tack Removable Download Bulletin
Summary: GF 287 RoughMark™ Clear is a 3.0 mil matte clear polymeric vinyl film coated with a high-tack removable (HTR) solvent acrylic pressure sensitive adhesive on a 90# layflat liner. The 90# liner provides excellent dimensional stability for digital printing. GF 287 accepts a variety of solvent-based, eco-solvent, latex and *UV curable inks common to wide format digital printing systems.
Applications:GF 287 RoughMark™ can be used in applications where a conformable removable vinyl is desired. This film conforms well using controlled heat and features clean removability from a variety of moderately textured substrates including brick, block, and concrete surfaces (vertical application only). If a high gloss finish is desired, it is recommended to use GF 242 gloss clear cast laminate.
NOTES:
- If applied to a painted surface the paint must bond tightly to the substrate. Test all applications prior to use. Not designed for coated/sealed/treated stainless steel, brass or bronze surfaces.
- Printed GF 287 graphics on dark surfaces may require the use of white inks for opacity.
Film Thickness: 3.0 mils.
(Thickness variation +/- 10%)
Adhesive Thickness Side One:1.8 to 2.1 mils
(Thickness variation +/- 10%)
Liner Thickness Side One:6.7 mils
(Thickness variation +/- 10%)
Liner Type:90# Layflat
Temperature Ranges:Minimum application temperature           +40°F.
Service temperature                              -40°F to +200 F.
Expected Exterior Exposure:Up to five (5) years outdoor durability under normal exposure conditions.
Adhesion:Stainless steel: 36 oz/ inch
PSTC-101 Method A with 24 hr. dwell at 70°F and 50% relative humidity.
Typical values.  Individual values may vary. Test thoroughly for your specific use.
Removability:Removable up to 6 months for common substrates under normal exposure conditions.
Water Resistance:Excellent
Humidity Resistance:Excellent
Product Codes:287-54         54” x 150’
287-5475     54” x 75’
287-60         60” x 150’
287-6075     60” x 75’
Recommendations:Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent penetration resulting in vinyl degradation. * For UV Curable inks, please consult with the ink manufacturer for specifics on ink flexibility.