VFLC-NTC-AP/90#

Flexible Lustre Clear Vinyl - Permanent Adhesive Download Bulletin
Summary: A 3.0 mil Lustre Clear flexible calendered vinyl film coated with 200-4981 permanent acrylic pressure sensitive adhesive on a 90# Layflat liner. These films are designed to accept a variety of UV curable and solvent-based screen inks and could be topcoated for use with flexographic, offset and letterpress inks but must be tested prior to use.
Applications:These products are designed for signage, decals, nameplates, die-cut letters and point-of-purchase displays.

If using the wet application method the product may fog when exposed to water. This condition will usually clear within 48 hours at normal temperature and humidity.
Film Thickness:3.0 mils.
(Thickness variance +/- 10%)
Adhesive Thickness Side One:0.8 to 1.0 mil.
(Thickness variance +/- 10%)
Liner Thickness Side One:6.7 mils.
(Thickness variance +/- 10%)
Adhesive Thickness Side Two:
 
Temperature Ranges:Minimum application temperature is +40°F.
Service temperature is -40°F to +180°F.
Dimensional Stability:Good.
Expected Exterior Exposure:Up to 2 years.
Adhesion:To stainless steel - 48 oz/in. PSTC-1 with 24 hr. dwell at70°F and 50% relative humidity. Typical values. Individual values may vary. Test thoroughly before production.
Water Resistance:Limited immersion resistance. Test for specific application.
Humidity Resistance:Good. Under high humidity conditions product may fog. This condition will usually clear within 48 hours at normal temperature and humidity.
Storage Stability:2 year shelf life when stored at 70°F and 50% relative humidity.
Product Codes:VFLC-NTC-AP/90#