GF 113 MOUNTING FILM

1.0 mil clear polyester
Clear double-sided adhesive (self-wound)
FILM TYPE Clear Polyester Carrier
FILM THICKNESS (mils) 1.0
ADHESIVE Emulsion Acrylic
RELEASE LINER Clear Printed Polyester, Silicone both sides
OUTDOOR DURABILITY Up to 6 months
TECHNICAL DATA SHEET
ficha técnica

GF 113 is a double-coated pressure sensitive 1.0 mil clear polyester film with permanent adhesive on one side and removable adhesive on the opposite side. GF 113 is self-wound on a 1.25 mil clear polyester liner printed with “Remove to Expose Adhesive” to identify the removable adhesive. This clear liner allows the graphics to be viewed after application of the 113 mounting adhesive. This product is designed for laminating thin flexible plastic films and papers commonly found in graphics for temporary application to glass. The permanent adhesive is exposed when the product is unwound leaving the removable adhesive protected by the liner. This clear mounting film can be laminated by the cold laminating process without the addition of heat.

APPLICATIONS

General Signage

POP & Indoor Signage

Windows

INK COMPATIBILITY
FREQUENTLY ASKED QUESTIONS
How do I know which side to apply to the printed graphic?
GF 113 is “Self Wound” on the roll, which means it only has one liner. The exposed adhesive side goes toward the graphic.
Which side is the removable side?
When you are finished applying the GF 113 film to your graphc, you will have a finished piece that will have the words “REMOVE TO EXPOSE ADHESIVE” on the face of the printed graphic. This is the side that is applied to the glass surface.
Is GF 113 product clear?
The GF 113 has good clarity, but is not considered “optically clear”.
What types of applications is GF 113 good for?
This clear mounting film is designed to mount digital prints, screen printed and other printed images to glass to produce a cleanly removable graphic. In all cases the substrates must be clean and free of dust, dirt and oil.