GF 333 AUTOMARK™ DRIFT® PW

3.0 mil polymeric wrap film

Grey slideable repositionable adhesive

FILM TYPE

White Polymeric Vinyl

FILM THICKNESS (mils)

3.0

ADHESIVE

Solvent Acrylic

RELEASE LINER

White PE-Coated Kraft, Slideable Air Egress

OUTDOOR DURABILITY

Up to 7 years

TECHNICAL DATA SHEET

ficha técnica

GF 333 AutoMark™ DRIFT® PW is a 3.0 mil polymeric gloss white conformable print media with a grey repositionable acrylic adhesive on a slideable air-egress layflat liner. DRIFT Technology allows the installer to float or drift the media over top of the OEM painted surface. The installer can then position and reposition the media until they are ready to engage the adhesive on the PSA film. GF 333 is designed to accept a variety of solvent, latex and UV curable inks common to wide format digital printing systems. The grey repositionable adhesive offers excellent opacity and exceptional repositionability and slideability. GF 333 AutoMark™ DRIFT® PW is specifically engineered for use in partial vehicle wrap, fleet, and decal applications.

ADDITIONAL RESOURCES

> Sell Sheet

APPLICATIONS

General Signage

Vehicle Graphics

INK COMPATIBILITY

Solvent

Eco-Solvent

Latex

UV Curable

Screen

Offset (UV Curable)

FREQUENTLY ASKED QUESTIONS

Can I use AUTOMARK™ DRIFT® PW for FULL car wraps?

The PW in the product name stands for “Partial Wrap”. GF 333 is ideally suited for flat surfaces, simple curves and gentle corrugations.

What does “slideable” mean?

The slideable adhesive allows the film to “DRIFT” on the OEM painted surface. This allows for easy repositioning. Once pressure is put upon the film, the adhesive will be activated.

What are “air-egress” channels?

GF 333 has a slideable air-egress liner. This liner has micro-embossing and a pattern is transferring to the adhesive. During application, this pattern allows air to be forced out from behind the film, thus helping to achieve bubble free results.

Is GF 333 AUTOMARK™ DRIFT® PW good for print-n-cut lettering?

No, GF 333 AutoMark DRIFT PW is not intended for small print-n-cut lettering due to the specially design micro-channel liner. It’s designed for partial wraps as well as medium-large graphics. It is best to use a smooth 90# liner when this type of graphic design is needed.