GF 247 PRINT-N-LAM™
3.0 mil gloss clear UV laminate
Clear permanent adhesive
| FILM TYPE | Clear Polymeric Vinyl |
| FILM THICKNESS (mils) | 3.0 |
| ADHESIVE | Emulsion Acrylic |
| RELEASE LINER | White 2-Sided PE-Coated Kraft |
| OUTDOOR DURABILITY | Up to 7 years |
GF 247 Print-n-Lam™ is a 3.0 mil gloss clear UV polymeric vinyl with clear permanent adhesive on a 90# layflat liner. GF 247 is designed to accept a variety of solvent, latex and UV curable inks common to wide format digital printing systems. It is specifically engineered for use in general signage, windows, and decal applications. GF 247 is ideal for printing or flat laminating.
APPLICATIONS
General Signage
POP & Indoor Signage
Windows
INK COMPATIBILITY
Solvent
Eco-Solvent
Latex
UV Curable
Offset (UV Curable)
FREQUENTLY ASKED QUESTIONS
Can I use GF 247 Print-n-Lam™ as a laminate?
GF 247 works equally well as a laminating film. If paired with GF 333 AutoMark™ DRIFT™ PW, it should be used only for flat/general signage. We do not recommend nor warrant GF 247 or GF 248 series to be paired with GF 333 for wraps or any vehicle or fleet application.
Can I wet apply GF 247 Print-n-Lam™?
It is possible, but since GF 247 is a water-based adhesive, there is the potential for temporary cloudiness when using commercial application fluids to apply this vinyl. The key is that the fluids needs to be squeegeed out as thoroughly as possible. What little moisture & fogginess that remains should then evaporate and dissipate in 24-48 hrs.
What applications are GF 247 Print-n-Lam™ good for?
For flat or general signage, commercial applications, point of purchase, and permanent windows.