GF 285 ROUGHMARK™

3.5 mil matte white conformable wall vinyl

Clear high-tack removable adhesive

FILM TYPE

White Polymeric Vinyl

FILM THICKNESS (mils)

3.5

ADHESIVE

Solvent Acrylic

RELEASE LINER

White 2-Sided PE-Coated Kraft

OUTDOOR DURABILITY

Up to 5 years

TECHNICAL DATA SHEET

ficha técnica

GF 285 RoughMark™ is a 3.5 mil matte white opaque polymeric vinyl film coated with a solvent acrylic high-tack removable (HTR) pressure sensitive adhesive on a 90# layflat liner. Its thick HTR adhesive is designed to aggressively grip onto textured substrates such as brick or block, yet cleanly remove without leaving adhesive residue on the contact surface. The 90# liner provides excellent dimensional stability for digital printing. GF 285 accepts a variety of solvent-based, eco-solvent, latex and *UV curable inks common to wide format digital printing systems. *For UV Curable inks, please consult with the ink manufacturer for specifics on ink flexibility.

ADDITIONAL RESOURCES

> Sell Sheet

APPLICATIONS

POP & Indoor Signage

Walls

INK COMPATIBILITY

Solvent

Eco-Solvent

Latex

UV Curable

Screen

Offset (UV Curable)

FREQUENTLY ASKED QUESTIONS

Can I use GF 285 on other surfaces?

GF 285 RoughMark™ can be used in applications where a conformable removable vinyl is desired. This film conforms well with controlled heat and features clean removability from a variety of moderately textured substrates including brick, block, and concrete surfaces (vertical application only). If a high gloss finish is desired, it is recommended to use GF 242 gloss clear cast laminate.

Can this product be used on Elevators?

This product is not intended for this application. Test all applications prior to use. Not designed for coated/ sealed/ treated stainless steel, brass or bronze surfaces.

When paneling larger jobs, do I use overlaps or butt-seams with this product?

Either is acceptable, although butt-seams require a high degree of skill to line up the panels. Because this product is going on uneven surfaces and is thinner than a normal wall vinyl, an overlap should be the default way to install.