SCREEN & OFFSET

A 2.0 mil print-treated metallized polyester film coated with permanent acrylic pressure sensitive adhesive on a 90# layflat liner. This film is designed to accept a variety of UV curable and solvent-based screen inks. May also be used with flexographic, offset and letterpress inks but must be tested prior to production. Designed for permanent decorative decals, product identification markings, point of purchase decals, and consumer information labels. Recommended for use on flat smooth substrates.

A 1.0 mil matte clear polyester film coated with permanent acrylic pressure sensitive adhesive on a 1.2 mil polyester liner. Designed for general purpose overlaminating film for decals or nameplates for protecting the underlying graphics.

A 3.75 mil clear flexible embossed polypropylene film designed for use as an economical short term protective overlay for Traffic Graffic® decals. This laminate is also an environmentally friendly alternative to PVC films. PPOL-AP overlaminate offers a permanent acrylic pressure sensitive adhesive formulated for exceptional clarity and bond for these types of applications. This product is intended for use as and overlaminating film to produce short term Traffic Graffic® floor decals, table and counter top applications. PP-OL is also approved for indirect food contact. The adhesive is formulated to adhere to most common printing inks. However, specific ink formulations must be tested before use. Some inks may contain excessive flow additives that could reduce adhesion of this product. UL 410 approved for slip resistance on interior floors and commercial carpets.

A 2.0 mil write-on, wipe-off dry erase 2.0 mil clear film. Designed for use with dry erase markers and coated
with a permanent acrylic pressure sensitive adhesive on a smooth paper overlaminating liner. This product is recommended for producing general purpose graphics, decals and unprinted substrates for use with dry erase pens. Typical substrates are paper, cardboard, photos and unprinted substrates.

A 2.3 mil white metalized print-treated polypropylene film coated with white pigmented permanent acrylic pressure sensitive adhesive on a smooth overlay liner. This film is designed to accept a variety of UV curable and solvent-based screen inks. May also be used with flexographic, offset and letterpress inks but must be tested prior to use. This product is designed as a low cost opaque overlaminating film for two-way decals. Film is especially suited for use with clear low tack vinyl or static cling vinyl window decals. Suggested use: (1) Print face down on a clear film, (2) Laminate barrier film over print, (3) Print face up image on top of barrier film.

A 8.0 mil matte white rigid vinyl with a removable adhesive backed by a 90# layflat liner. This product offers high dyne levels, excellent opacity and layflat along with high tear strength. Available in sheets or rolls from 54 inch wide masters.

A 8.0 mil matte white rigid vinyl print stock designed to produce two side window decals. This product offers high dyne levels, excellent opacity and layflat along with high tear strength. Designed for two-sided window decals requiring excellent blockout of the reverse graphics for either permanent or removable decals. Use with GF 113, 114, and 116 and to produce two-sided window decals. This product offers excellent adhesion to solvent screen; UV screen and UV offset inks designed for banners. However, printability and adhesion of your specific ink must be tested and approved before production. Available in sheets or rolls from 54 inch wide masters.

A 1.5-mil silver metallized print-treated polyester film coated with permanent acrylic pressure sensitive adhesive on a 90# layflat liner. This polyester film is designed to accept a variety of UV curable and solvent-based screen inks. May also be used with flexographic, offset, and letterpress inks but must be tested prior to use. The 90# liner offers good dimensional stability over a range of environmental conditions resulting in excellent sheet printing. Designed for general purpose printing of nameplates, decals, product identification markings and labels. For use on smooth flat surfaces.

A 2.0-mil silver metallized print-treated polyester film coated with permanent acrylic pressure sensitive adhesive on a 90# layflat liner. This polyester film is designed to accept a variety of UV curable and solvent-based screen inks. May also be used with flexographic, offset, and letterpress inks but must be tested prior to use. The 90# liner offers good dimensional stability over a range of environmental conditions resulting in excellent sheet printing. Designed for general purpose printing of nameplates, decals, product identification markings and labels. For use on smooth flat surfaces.

A 2.0 mil silver metallized print-treated polyester film coated with high tack permanent acrylic pressure sensitive adhesive on a 90# layflat liner. This polyester film is designed to accept a variety of UV curable and solvent-based screen inks. May also be used with flexographic, offset, and letterpress inks but must be tested prior to use. The 90# liner offers good dimensional stability over a range of environmental conditions resulting in excellent sheet printing. This product is designed for permanent decals and nameplates requiring adhesion to a variety of substrates ranging from clean metal, painted metal, glass, styrene and low surface energy plastics such as polypropylene and polyethylene. May also be applicable to certain powder coated metal finishes.

A 3.0 mil matte white synthetic paper film coated with a permanent acrylic pressure sensitive adhesive on a 90# layflat liner. The SP3 film is a waterproof alternative to paper print stock. The clear permanent adhesive is designed for use on most clean smooth surfaces. The 90# liner offers excellent dimensional stability for sheet printing. SP3-NTC-AP/90 is compatible with most screen, offset, flexographic, and UV-curable inks. Standard inks with high solvent content may yield diminished print quality. Must be tested for your specific application.

A 3.0 mil matte white synthetic paper film coated with a removable acrylic pressure sensitive adhesive on a 90# layflat liner. The SP3 film is a waterproof alternative to paper print stock. The clear removable adhesive is designed for use on most clean smooth surfaces. The 90# liner offers excellent dimensional stability for sheet printing. SP3-NTC-ARLT/90 is compatible with most screen, offset, flexographic, and UV-curable inks. Standard inks with high solvent content may yield diminished print quality. Must be tested for your specific application.

A 5.0 mil clear rigid calendered vinyl film with a slight texture designed for use as a protective overlay. Adhesive is a water based permanent acrylic pressure sensitive adhesive formulated for exceptional clarity and long term compatibility with vinyl films. This product is supplied on a 1.5 mil polyester clear liner designed to provide extremelysmooth adhesive coating. The scratch resistant vinyl overlay film should be considered as an inexpensive alternative to polycarbonate overlay where specifications allow. Designed for use as a protective and decorative overlaminate to produce mouse pads, counter mats, decals and display graphics. The adhesive is formulated to adhere to most common printing inks. However, specific formulations must be tested before use. Some inks may contain excessive flow additives that could reduce adhesion of this product. UL 410 approved for slip resistance on interior floors and commercial carpets.

A 5.0 mil scratch resistant clear laminate with a textured matte finish. This laminating film is an inexpensive and durable alternative to polycarbonate film. It has a permanent solvent acrylic pressure sensitive adhesive formulated for exceptional clarity. Produced on a 1.5 mil polyester clear liner, the laminate has an extremely smooth adhesive coating. This product is designed to be paired with approved print films to create graphics for tile and carpet. It has been rated for slip resistance based on multiple testing methods. UL 410 approved for slip resistance on interior floors and commercial carpets.

A 3.4 mil matte black flexible calendered vinyl film coated with permanent acrylic pressure sensitive adhesive on a 90# layflat liner. This film is designed to accept a variety of UV curable and solvent-based screen inks for general decal printing. This product is designed for signage, decals, nameplates, die-cut letters and point-of-purchase displays.